| Quantity: | |
|---|---|
TN-HTD2200E
TN
Small width high voltage power supply special for electrostatic electret
TN-HTD2200E series is a high-performance 19-inch standard rack-mounted high-voltage power supply. Adopt digital control mode, over-voltage and over-current short-circuit arc protection, fast voltage and current transient response capability, stable output of up to 0.01%, and stable electrostatic field make efficient filtering during melt-blowing electret process.
Features
● Output voltage 0 ~ 60kV continuously adjustable
● Output power 600W
● Rated output current 10mA
● Nanosecond protection response
● Overvoltage / overcurrent / overtemperature / arc protection
Typical application
Electrostatic electret, electrostatic separation, electrostatic separation, electrostatic elimination, electrostatic spinning, electrostatic printing and other electrostatic applications
Technical parameter
Input | AC220±10%，50/60Hz |
Output | voltage, 0kv to 60kV continuously adjustable, each model provides positive or negative output. |
Front panel status indication | High voltage on / off, constant voltage, constant current, positive / negative polarity.The power supply also has a status abnormal code display function |
Voltage control | The rotary encoder can set the output voltage from 0 to rated voltage |
External analog control | An external 0 to 10V control signal sets the output to 0 to rated voltage |
Digital communication control | the output can be set from 0 to rated voltage according to standard communication protocol through RS-485 communication interface. |
Current control | None |
Relative input | ± 0.01% (input voltage change is ± 10%). |
Ripple voltage | better than 1% rms. |
Working temperature | 0 ℃ to 50 ℃. |
Storage temperature | -20 ℃ to 80 ℃ |
Temperature coefficient | 0.01% per centigrade |
Stability | After half an hour of start-up, it is better than 0.05% every 8 hours |
Voltage and current indication | Four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word. |
Dimension | 482mm wide, 88mm high and 320mm deep. |
Weight | 13kg |
High voltage connector | The recessed plastic insulated conduit and the high-voltage cable are connected by a metal connector with a diameter of 16mm / 28mm. The total length of standard high voltage cable is 1m. Other lengths can be customized. |
Small width high voltage power supply special for electrostatic electret
TN-HTD2200E series is a high-performance 19-inch standard rack-mounted high-voltage power supply. Adopt digital control mode, over-voltage and over-current short-circuit arc protection, fast voltage and current transient response capability, stable output of up to 0.01%, and stable electrostatic field make efficient filtering during melt-blowing electret process.
Features
● Output voltage 0 ~ 60kV continuously adjustable
● Output power 600W
● Rated output current 10mA
● Nanosecond protection response
● Overvoltage / overcurrent / overtemperature / arc protection
Typical application
Electrostatic electret, electrostatic separation, electrostatic separation, electrostatic elimination, electrostatic spinning, electrostatic printing and other electrostatic applications
Technical parameter
Input | AC220±10%，50/60Hz |
Output | voltage, 0kv to 60kV continuously adjustable, each model provides positive or negative output. |
Front panel status indication | High voltage on / off, constant voltage, constant current, positive / negative polarity.The power supply also has a status abnormal code display function |
Voltage control | The rotary encoder can set the output voltage from 0 to rated voltage |
External analog control | An external 0 to 10V control signal sets the output to 0 to rated voltage |
Digital communication control | the output can be set from 0 to rated voltage according to standard communication protocol through RS-485 communication interface. |
Current control | None |
Relative input | ± 0.01% (input voltage change is ± 10%). |
Ripple voltage | better than 1% rms. |
Working temperature | 0 ℃ to 50 ℃. |
Storage temperature | -20 ℃ to 80 ℃ |
Temperature coefficient | 0.01% per centigrade |
Stability | After half an hour of start-up, it is better than 0.05% every 8 hours |
Voltage and current indication | Four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word. |
Dimension | 482mm wide, 88mm high and 320mm deep. |
Weight | 13kg |
High voltage connector | The recessed plastic insulated conduit and the high-voltage cable are connected by a metal connector with a diameter of 16mm / 28mm. The total length of standard high voltage cable is 1m. Other lengths can be customized. |
