| Quantity: | |
|---|---|
TN-TD2202
TN
TN-TD2202 is a special high-voltage power supply for electrostatic electret equipment in the melt-blown nonwoven industry. Adopt digital control mode, full abnormal slow start, nanosecond arc-response ability to ensure the melt-blown production line is fault-free and long-term operation The high stability can make the ionization effect more stable. The customer feedback of the TD2202 series high voltage power supply equipment can reach the BFE99 standard.
Features
● Optional output voltage 60kV / 100kV (other voltages can be customized)
● Output current 20mA
● One-key operation function
● High-speed mode / abnormal self-judgment / parameter self-test function
● No melting hole mode
● RS-485 isolated digital communication
● Safety interlock function
Typical application
Melt blown non-woven fabric with static electricity;Electrostatic separation;Electrostatic elimination
Technical parameter
Input | AC220V±10%，16A ，50/60Hz |
Output | 60kV or 100kV optional, positive or negative optional |
Manual mode | v Front panel of power supply: the power supply has its own rotary encoder, which can set the output voltage / current from 0 to the rated value. v External analog control: An external 0 to 10V control signal can set the output from 0 to rated value. v Digital communication control: the output can be set from 0 to rated value according to standard communication protocol through RS-485 communication interface. |
One-click operation | In one-key operation mode, the power supply will work with relatively good voltage and current. At this time, the operating parameters are not fixed and will automatically change with the environment. If the effect is not good, you can cancel this function and use manual mode to manually adjust the voltage and current |
High-speed mode | The power supply has enabled this mode by default. In this mode, the power supply will work at the fastest exception handling speed to avoid the exception handling that is too slow and leads to an increase in product defect rate. |
No-melt mode (under development | Press and hold to light up to start the non-melting hole mode. This mode will make the power supply work in an intelligent judgment state, which can avoid some ignition situations. |
Abnormal self judgment | Intelligent exception judgment processing, in the case of such abnormalities as over-voltage, over-current, short circuit, arcing and overheating, will choose its own working mode. |
Parameter self test | This function is suitable for the debugger to use this device for the first time. Long press this button until the voltage has no obvious fluctuation. Release this button, then the voltage and current at this time are the reference working parameters. |
Setting | Accept customer's special customized function |
Voltage / current adjustment rate | relative load / input: 0.01% |
Ripple voltage | better than 1% rms at rated voltage |
Temperature | Working temp0 ℃ ~ 50 ℃; storage temp: -20 ℃ ~ 80 ℃. |
Dust environment | need to add some filtering devices. |
Temperature coefficient | usually 100ppm per degree Celsius |
Stability | After half an hour of start-up, it is better than 0.05% every 8 hours. |
Humidity | 10-90% without condensation. |
Voltage and current indication | four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word. |
Protection | It has basic protection functions such as overheating, overvoltage, overcurrent, short circuit, arc drawing, etc. Other required protection functions can be customized. |
High-voltage connector | The recessed plastic insulated conduit and the high-voltage cable penetrated are connected by a 16mm / 28mm diameter metal connector. The total length of standard high-voltage cable is 2m (other lengths can be customized). |
Dimensions | 60kV: 482mm wide, 133.5mm high and 320mm deep. 100kV: 482mm wide and 133.5mm high and 500mm deep. |
Weight | 20kg ~ 30kg |
TN-TD2202 is a special high-voltage power supply for electrostatic electret equipment in the melt-blown nonwoven industry. Adopt digital control mode, full abnormal slow start, nanosecond arc-response ability to ensure the melt-blown production line is fault-free and long-term operation The high stability can make the ionization effect more stable. The customer feedback of the TD2202 series high voltage power supply equipment can reach the BFE99 standard.
Features
● Optional output voltage 60kV / 100kV (other voltages can be customized)
● Output current 20mA
● One-key operation function
● High-speed mode / abnormal self-judgment / parameter self-test function
● No melting hole mode
● RS-485 isolated digital communication
● Safety interlock function
Typical application
Melt blown non-woven fabric with static electricity;Electrostatic separation;Electrostatic elimination
Technical parameter
Input | AC220V±10%，16A ，50/60Hz |
Output | 60kV or 100kV optional, positive or negative optional |
Manual mode | v Front panel of power supply: the power supply has its own rotary encoder, which can set the output voltage / current from 0 to the rated value. v External analog control: An external 0 to 10V control signal can set the output from 0 to rated value. v Digital communication control: the output can be set from 0 to rated value according to standard communication protocol through RS-485 communication interface. |
One-click operation | In one-key operation mode, the power supply will work with relatively good voltage and current. At this time, the operating parameters are not fixed and will automatically change with the environment. If the effect is not good, you can cancel this function and use manual mode to manually adjust the voltage and current |
High-speed mode | The power supply has enabled this mode by default. In this mode, the power supply will work at the fastest exception handling speed to avoid the exception handling that is too slow and leads to an increase in product defect rate. |
No-melt mode (under development | Press and hold to light up to start the non-melting hole mode. This mode will make the power supply work in an intelligent judgment state, which can avoid some ignition situations. |
Abnormal self judgment | Intelligent exception judgment processing, in the case of such abnormalities as over-voltage, over-current, short circuit, arcing and overheating, will choose its own working mode. |
Parameter self test | This function is suitable for the debugger to use this device for the first time. Long press this button until the voltage has no obvious fluctuation. Release this button, then the voltage and current at this time are the reference working parameters. |
Setting | Accept customer's special customized function |
Voltage / current adjustment rate | relative load / input: 0.01% |
Ripple voltage | better than 1% rms at rated voltage |
Temperature | Working temp0 ℃ ~ 50 ℃; storage temp: -20 ℃ ~ 80 ℃. |
Dust environment | need to add some filtering devices. |
Temperature coefficient | usually 100ppm per degree Celsius |
Stability | After half an hour of start-up, it is better than 0.05% every 8 hours. |
Humidity | 10-90% without condensation. |
Voltage and current indication | four-digit LED digital tube, under rated output conditions, the error is 1% ± 1 word. |
Protection | It has basic protection functions such as overheating, overvoltage, overcurrent, short circuit, arc drawing, etc. Other required protection functions can be customized. |
High-voltage connector | The recessed plastic insulated conduit and the high-voltage cable penetrated are connected by a 16mm / 28mm diameter metal connector. The total length of standard high-voltage cable is 2m (other lengths can be customized). |
Dimensions | 60kV: 482mm wide, 133.5mm high and 320mm deep. 100kV: 482mm wide and 133.5mm high and 500mm deep. |
Weight | 20kg ~ 30kg |
