| Quantity: | |
|---|---|
TN
Electrostatic spraying is a kind of spraying method that uses high-voltage electrostatic field to make the negatively charged coating particles move along the opposite direction of the electric field and adsorb the coating particles on the surface of the workpiece. Electrostatic spraying equipment is composed of spray gun, spray cup and high voltage power supply. The power supply has the characteristics of small time drift and temperature drift, high stability, low output ripple, strong anti-interference performance, high conversion efficiency, continuous adjustable output voltage, high accuracy of digital monitoring and display of output voltage and current. At the same time, it also has the functions of over-voltage, short-circuit protection and soft start-up.
Product Characteristics
Output high voltage up to dc200KV | output high voltage continuously adjustable |
High precision LED output digital display | Internal modular design |
Small time drift and temp drift, high stability | Overload and short circuit protection |
Small size | Start control and soft start |
Local or remote control and serial parallel port communication can be used in remote control | |
Specification
Power supply : | AC220V±10% 50/60Hz |
Soft start function | |
Protection: | Over voltage, over current, short circuit protection. |
Ambient temperature | Working temperature: 0℃~+50℃; Storage temperature: -10℃~+80℃. |
Tempe drift coefficient | ＜0.1%/℃ |
Time drift stability | < 0.1%/h (after 30 minutes of preheating time) |
Voltage regulation rate | < 0.1% (AC220V ± 10%) |
Load regulation rate | < 0.1% (output no-load to full load) |
Control mode
| Local control or remote control Local control: knob: continuously adjust output voltage. Start/stop control switch: start and close high voltage power supply. (press this key to start) Power switch: main power switch. Remote control: voltage remote control Terminal remote control: computer programming control, PLC control, etc |
Output
Ø No load to maximum output current;
Ø Positive / negative output is optional;
Ø Continuously adjustable from 0V to maximum voltage;
output voltage | output current | Max.output power | size |
DC0~+30000V | 1mA | 30W | 310*300*115mm |
DC0~+50000V | 1mA | 50W | 310*300*115mm |
DC0~+100000V | 2mA | 200W | 4U standard |
Adjustable from 0 to maximum voltage | |||
Electrostatic spraying is a kind of spraying method that uses high-voltage electrostatic field to make the negatively charged coating particles move along the opposite direction of the electric field and adsorb the coating particles on the surface of the workpiece. Electrostatic spraying equipment is composed of spray gun, spray cup and high voltage power supply. The power supply has the characteristics of small time drift and temperature drift, high stability, low output ripple, strong anti-interference performance, high conversion efficiency, continuous adjustable output voltage, high accuracy of digital monitoring and display of output voltage and current. At the same time, it also has the functions of over-voltage, short-circuit protection and soft start-up.
Product Characteristics
Output high voltage up to dc200KV | output high voltage continuously adjustable |
High precision LED output digital display | Internal modular design |
Small time drift and temp drift, high stability | Overload and short circuit protection |
Small size | Start control and soft start |
Local or remote control and serial parallel port communication can be used in remote control | |
Specification
Power supply : | AC220V±10% 50/60Hz |
Soft start function | |
Protection: | Over voltage, over current, short circuit protection. |
Ambient temperature | Working temperature: 0℃~+50℃; Storage temperature: -10℃~+80℃. |
Tempe drift coefficient | ＜0.1%/℃ |
Time drift stability | < 0.1%/h (after 30 minutes of preheating time) |
Voltage regulation rate | < 0.1% (AC220V ± 10%) |
Load regulation rate | < 0.1% (output no-load to full load) |
Control mode
| Local control or remote control Local control: knob: continuously adjust output voltage. Start/stop control switch: start and close high voltage power supply. (press this key to start) Power switch: main power switch. Remote control: voltage remote control Terminal remote control: computer programming control, PLC control, etc |
Output
Ø No load to maximum output current;
Ø Positive / negative output is optional;
Ø Continuously adjustable from 0V to maximum voltage;
output voltage | output current | Max.output power | size |
DC0~+30000V | 1mA | 30W | 310*300*115mm |
DC0~+50000V | 1mA | 50W | 310*300*115mm |
DC0~+100000V | 2mA | 200W | 4U standard |
Adjustable from 0 to maximum voltage | |||
