| Quantity: | |
|---|---|
TN
Our comprehensive offering of sputtering targets, evaporation sources and other deposition materials is listed by material throughout the website. Below you will find budgetary pricing for sputtering targets and deposition materials per your requirements. Actual prices may vary due to market fluctuations. To speak to someone directly about current pricing or for a quote on sputtering targets and other deposition products not listed
Aluminum Nitride (Al/N) Specifications:
Material Type | Aluminum Nitride |
Symbol | AlN |
Color/Appearance | Bluish White, Crystalline Solid |
Melting Point (°C) | >2,200 |
Theoretical Density (g/cc) | 3.26 |
Z Ratio | **1.00 |
Sputter | RF-R |
Max Power Density (Watts/Square Inch) | 20* |
Type of Bond | Elastomer |
This is a recommendation based on our experience running these materials in KJLC guns. The ratings are based on unbonded targets and are material specific. Bonded targets should be run at lower powers to prevent bonding failures. Bonded targets should be run at 20 Watts/Square Inch or lower, depending on the material.
Suggested maximum power densities are based on using a sputter up orientation with optimal thermal transfer from target to the sputter cathode cooling well. Using other sputtering orientations or if there is a poor thermal interface between target to sputter cathode cooling well may require a reduction in suggested maximum power density and/or application of a thermal transfer paste.
Our comprehensive offering of sputtering targets, evaporation sources and other deposition materials is listed by material throughout the website. Below you will find budgetary pricing for sputtering targets and deposition materials per your requirements. Actual prices may vary due to market fluctuations. To speak to someone directly about current pricing or for a quote on sputtering targets and other deposition products not listed
Aluminum Nitride (Al/N) Specifications:
Material Type | Aluminum Nitride |
Symbol | AlN |
Color/Appearance | Bluish White, Crystalline Solid |
Melting Point (°C) | >2,200 |
Theoretical Density (g/cc) | 3.26 |
Z Ratio | **1.00 |
Sputter | RF-R |
Max Power Density (Watts/Square Inch) | 20* |
Type of Bond | Elastomer |
This is a recommendation based on our experience running these materials in KJLC guns. The ratings are based on unbonded targets and are material specific. Bonded targets should be run at lower powers to prevent bonding failures. Bonded targets should be run at 20 Watts/Square Inch or lower, depending on the material.
Suggested maximum power densities are based on using a sputter up orientation with optimal thermal transfer from target to the sputter cathode cooling well. Using other sputtering orientations or if there is a poor thermal interface between target to sputter cathode cooling well may require a reduction in suggested maximum power density and/or application of a thermal transfer paste.
